SS 410 Martensitic Stainless Bars
AISI 410 (UNS S41000) · DIN 1.4006 · JIS SUS410
SS 410 Martensitic Stainless Bars in ready stock at our Madurai godowns, annealed / hardened & tempered, Ø 10–150 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.75 g/cm³ · Ø 10–150 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 10 | 0.61 | 3.65 | |
| 12 | 0.88 | 5.26 | |
| 16 | 1.56 | 9.35 | |
| 20 | 2.43 | 14.6 | |
| 25 | 3.80 | 22.8 | |
| 32 | 6.23 | 37.4 | |
| 40 | 9.74 | 58.4 | |
| 50 | 15.2 | 91.3 | |
| 63 | 24.2 | 145.0 | |
| 80 | 39.0 | 233.7 | |
| 100 | 60.9 | 365.2 | |
| 125 | 95.1 | 570.6 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | Cr | Ni |
|---|---|---|---|---|---|
| Min | 0.08 | – | – | 11.5 | – |
| Max | 0.15 | 1.00 | 1.00 | 13.5 | 0.75 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 485 MPa min (ann.)
- Yield
- 275 MPa min
- Hardness
- 217 HB max (ann.)
- Hardened
- 35–45 HRC
IV. Supply condition
- Condition
- Annealed / hardened & tempered
- Machinability
- Good
- Forms
- round
- Cutting
- Band saw ±1 mm
- SKU
- SST-SS-10
V. Weigh it, then request it.
Locked to SS 410SS 410 · 7.75 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.75 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Valve parts, pump shafts, cutlery
About SS 410
Can you cut SS 410 to my sizes?
Yes. SS 410 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with SS 410?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 10–150 mm. For large tonnage, message us to reserve material.
What are the equivalents of SS 410?
AISI 410 (UNS S41000), DIN 1.4006, JIS SUS410. Equivalents are close matches; confirm against your drawing's specification.
