SS 202 Sheets & Plates
AISI 202 (UNS S20200) · DIN 1.4373 · JIS SUS202
SS 202 Sheets & Plates in ready stock at our Madurai godowns, annealed, 0.4–6 mm thick. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.8 g/cm³ · 0.4–6 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 0.8 | 6.24 | 19.5 | |
| 1 | 7.80 | 24.4 | |
| 1.6 | 12.5 | 39.0 | |
| 2 | 15.6 | 48.8 | |
| 3 | 23.4 | 73.1 | |
| 5 | 39.0 | 121.9 | |
| 6 | 46.8 | 146.3 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | Cr | Ni | N |
|---|---|---|---|---|---|---|
| Min | – | 7.5 | – | 17.0 | 4.0 | – |
| Max | 0.15 | 10.0 | 1.00 | 19.0 | 6.0 | 0.25 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 620 MPa min
- Yield
- 260 MPa min
- Hardness
- 241 HB max
- Elongation
- 40% min
IV. Supply condition
- Condition
- Annealed
- Machinability
- Fair
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-SS-09
V. Weigh it, then request it.
Locked to SS 202SS 202 · 7.8 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 7.8 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Utensils, cladding, furniture
About SS 202
Can you cut SS 202 to my sizes?
Yes. SS 202 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with SS 202?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
0.4–6 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of SS 202?
AISI 202 (UNS S20200), DIN 1.4373, JIS SUS202. Equivalents are close matches; confirm against your drawing's specification.
