SS 202 Round Bars & Hex Bars
AISI 202 (UNS S20200) · DIN 1.4373 · JIS SUS202
SS 202 Round Bars & Hex Bars in ready stock at our Madurai godowns, annealed, Ø 3–150 mm · hex 6–50 A/F. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.8 g/cm³ · Ø 3–150 mm · hex 6–50 A/F| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 6 | 0.22 | 1.32 | |
| 8 | 0.39 | 2.35 | |
| 10 | 0.61 | 3.68 | |
| 12 | 0.88 | 5.29 | |
| 16 | 1.57 | 9.41 | |
| 20 | 2.45 | 14.7 | |
| 25 | 3.83 | 23.0 | |
| 32 | 6.27 | 37.6 | |
| 40 | 9.80 | 58.8 | |
| 50 | 15.3 | 91.9 | |
| 63 | 24.3 | 145.9 | |
| 80 | 39.2 | 235.2 | |
| 100 | 61.3 | 367.6 | |
| 125 | 95.7 | 574.3 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | Cr | Ni | N |
|---|---|---|---|---|---|---|
| Min | – | 7.5 | – | 17.0 | 4.0 | – |
| Max | 0.15 | 10.0 | 1.00 | 19.0 | 6.0 | 0.25 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 620 MPa min
- Yield
- 260 MPa min
- Hardness
- 241 HB max
- Elongation
- 40% min
IV. Supply condition
- Condition
- Annealed
- Machinability
- Fair
- Forms
- round, hex
- Cutting
- Band saw ±1 mm
- SKU
- SST-SS-08
V. Weigh it, then request it.
Locked to SS 202SS 202 · 7.8 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.8 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Fasteners, hardware, architectural
About SS 202
Can you cut SS 202 to my sizes?
Yes. SS 202 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with SS 202?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 3–150 mm · hex 6–50 A/F. For large tonnage, message us to reserve material.
What are the equivalents of SS 202?
AISI 202 (UNS S20200), DIN 1.4373, JIS SUS202. Equivalents are close matches; confirm against your drawing's specification.
