HTB1 Manganese Bronze Rods
BS 1400 HTB1 · UNS C86500 (approx.) · EN CuZn35AlFeMn
Manganese Bronze Rods in ready stock at our Madurai godowns, cast / extruded, Ø 20–200 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8.3 g/cm³ · Ø 20–200 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 20 | 2.61 | 15.6 | |
| 25 | 4.07 | 24.4 | |
| 32 | 6.68 | 40.1 | |
| 40 | 10.4 | 62.6 | |
| 50 | 16.3 | 97.8 | |
| 63 | 25.9 | 155.2 | |
| 80 | 41.7 | 250.3 | |
| 100 | 65.2 | 391.1 | |
| 125 | 101.9 | 611.1 | |
| 160 | 166.9 | 1,001.3 | |
| 200 | 260.8 | 1,564.5 |
II. Chemical composition (% by weight)
| Element | Cu | Al | Fe | Mn | Zn |
|---|---|---|---|---|---|
| Min | 55.0 | 0.5 | 0.5 | 0.5 | rem. |
| Max | 60.0 | 2.5 | 1.5 | 3.0 | – |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 470 MPa min
- Yield
- 170 MPa min
- Hardness
- 100–150 HB
- Elongation
- 18% min
IV. Supply condition
- Condition
- Cast / extruded
- Machinability
- Good
- Forms
- round
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-13
V. Weigh it, then request it.
Locked to HTB1HTB1 · 8.3 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 8.3 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Marine shafts, gears, valve stems
About HTB1
Can you cut HTB1 to my sizes?
Yes. HTB1 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with HTB1?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 20–200 mm. For large tonnage, message us to reserve material.
What are the equivalents of HTB1?
BS 1400 HTB1, UNS C86500 (approx.), EN CuZn35AlFeMn. Equivalents are close matches; confirm against your drawing's specification.
