AB2 Aluminium Bronze AB2 Rods
BS 1400 AB2 · EN CuAl10Fe5Ni5 (CC333G) · UNS C95800 (approx.)
Aluminium Bronze AB2 Rods in ready stock at our Madurai godowns, cast / extruded, Ø 20–250 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.6 g/cm³ · Ø 20–250 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 20 | 2.39 | 14.3 | |
| 25 | 3.73 | 22.4 | |
| 32 | 6.11 | 36.7 | |
| 40 | 9.55 | 57.3 | |
| 50 | 14.9 | 89.5 | |
| 63 | 23.7 | 142.1 | |
| 80 | 38.2 | 229.2 | |
| 100 | 59.7 | 358.1 | |
| 125 | 93.3 | 559.6 | |
| 160 | 152.8 | 916.8 | |
| 200 | 238.8 | 1,432.6 | |
| 250 | 373.1 | 2,238.4 |
II. Chemical composition (% by weight)
| Element | Al | Fe | Ni | Mn | Cu |
|---|---|---|---|---|---|
| Min | 8.5 | 4.0 | 4.0 | – | rem. |
| Max | 10.5 | 5.5 | 6.0 | 3.0 | – |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 640 MPa min
- Yield
- 250 MPa min
- Hardness
- 140–180 HB
- Elongation
- 13% min
IV. Supply condition
- Condition
- Cast / extruded
- Machinability
- Fair
- Forms
- round, tube
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-12
V. Weigh it, then request it.
Locked to AB2AB2 · 7.6 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.6 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Marine, pump impellers, heavy bushes
About AB2
Can you cut AB2 to my sizes?
Yes. AB2 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with AB2?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 20–250 mm. For large tonnage, message us to reserve material.
What are the equivalents of AB2?
BS 1400 AB2, EN CuAl10Fe5Ni5 (CC333G), UNS C95800 (approx.). Equivalents are close matches; confirm against your drawing's specification.
