6063 Aluminium 6063 Architectural Shapes
AA 6063 · EN AW-6063 (AlMg0.7Si) · IS 63400 (HE9) · DIN 3.3206
Aluminium 6063 Architectural Shapes in ready stock at our Madurai godowns, t5 / t6 extruded, Angles, channels, tubes, flats. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 2.7 g/cm³ · Angles, channels, tubes, flats| A × B × WT mm | kg / metre | kg / 6 m | |
|---|---|---|---|
| 40 × 40 × 2.6 | 1.05 | 6.30 | |
| 50 × 25 × 2.9 | 1.08 | 6.50 | |
| 60 × 60 × 3.2 | 1.96 | 11.8 | |
| 80 × 40 × 3.2 | 1.96 | 11.8 | |
| 100 × 50 × 4 | 3.07 | 18.4 | |
| 100 × 100 × 4 | 4.15 | 24.9 | |
| 150 × 100 × 5 | 6.48 | 38.9 | |
| 200 × 200 × 6 | 12.6 | 75.4 |
II. Chemical composition (% by weight)
| Element | Mg | Si | Fe | Cu |
|---|---|---|---|---|
| Min | 0.45 | 0.20 | – | – |
| Max | 0.90 | 0.60 | 0.35 | 0.10 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 241 MPa (T6)
- Yield
- 214 MPa
- Hardness
- 73 HB
- Finish
- Anodising quality
IV. Supply condition
- Condition
- T5 / T6 extruded
- Machinability
- Good
- Forms
- rect, angle, tube, flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-15
V. Weigh it, then request it.
Locked to 60636063 · 2.7 g/cm³
W = (2(A + B) − 4·WT) × WT × L × ρ ÷ 1,000,000 (with inside sizes, WT = (A − a) ÷ 2 = (B − b) ÷ 2) · ρ = 2.7 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Windows, partitions, frames
About 6063
Can you cut 6063 to my sizes?
Yes. 6063 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with 6063?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Angles, channels, tubes, flats. For large tonnage, message us to reserve material.
What are the equivalents of 6063?
AA 6063, EN AW-6063 (AlMg0.7Si), IS 63400 (HE9), DIN 3.3206. Equivalents are close matches; confirm against your drawing's specification.
