Engineering Plastics · Dossier
PTFE Teflon Sheets & Gaskets
PTFE virgin · Glass / carbon filled on request
PTFE Teflon Sheets & Gaskets in ready stock: 0.5–50 mm thick. Cut to length or sheet size on request.
Tensile25 MPa
Range0.5–50 mm
In stock
I. Sizes & weights
Nominal weights at 2.2 g/cm³ · 0.5–50 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 0.8 | 1.76 | 5.50 | |
| 1 | 2.20 | 6.88 | |
| 1.6 | 3.52 | 11.0 | |
| 2 | 4.40 | 13.8 | |
| 3 | 6.60 | 20.6 | |
| 5 | 11.0 | 34.4 | |
| 6 | 13.2 | 41.3 | |
| 8 | 17.6 | 55.0 | |
| 10 | 22.0 | 68.8 | |
| 12 | 26.4 | 82.5 | |
| 16 | 35.2 | 110.0 | |
| 20 | 44.0 | 137.5 | |
| 25 | 55.0 | 171.9 | |
| 32 | 70.4 | 220.0 | |
| 40 | 88.0 | 275.0 | |
| 50 | 110.0 | 343.8 |
III. Mechanical properties
- Density
- 2.20 g/cm³
- Tensile
- 25 MPa
- Max service
- 260 °C
- Chemical
- Inert to nearly all
IV. Supply condition
- Condition
- Moulded / skived
- Machinability
- Good
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-EP-07
V. Weigh it, then request it.
Locked to PTFEShape
Material
PTFE · 2.2 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 2.2 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Applications
Gaskets, slide bearings, linings
Questions
About PTFE
Can you cut PTFE to my sizes?
Yes. PTFE is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with PTFE?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
0.5–50 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of PTFE?
PTFE virgin, Glass / carbon filled on request. Equivalents are close matches; confirm against your drawing's specification.
