Engineering Plastics · Dossier
PP-H Polypropylene (PP) Sheets & Rods
PP homopolymer · PP-H
Polypropylene (PP) Sheets & Rods in ready stock: Sheets 2–50 mm · rods 10–200 mm. Cut to length or sheet size on request.
Tensile30–35 MPa
Range 2–50 mm
Limited
I. Sizes & weights
Nominal weights at 0.9 g/cm³ · Sheets 2–50 mm · rods 10–200 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 6 | 0.03 | 0.15 | |
| 8 | 0.05 | 0.27 | |
| 10 | 0.07 | 0.42 | |
| 12 | 0.10 | 0.61 | |
| 16 | 0.18 | 1.09 | |
| 20 | 0.28 | 1.70 | |
| 25 | 0.44 | 2.65 | |
| 32 | 0.72 | 4.34 | |
| 40 | 1.13 | 6.79 | |
| 50 | 1.77 | 10.6 |
III. Mechanical properties
- Density
- 0.90 g/cm³
- Tensile
- 30–35 MPa
- Max service
- 100 °C
- Chemical
- Acid and alkali resistant
IV. Supply condition
- Condition
- Extruded
- Machinability
- Good
- Forms
- round, plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-EP-08
V. Weigh it, then request it.
Locked to PP-HShape
Material
PP-H · 0.9 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 0.9 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Applications
Chemical tanks, plating, food
Questions
About PP-H
Can you cut PP-H to my sizes?
Yes. PP-H is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with PP-H?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Sheets 2–50 mm · rods 10–200 mm. For large tonnage, message us to reserve material.
What are the equivalents of PP-H?
PP homopolymer, PP-H. Equivalents are close matches; confirm against your drawing's specification.
