Engineering Plastics · Dossier
PTFE Teflon Rods & Tubes
PTFE virgin · Glass / carbon filled on request
PTFE Teflon Rods & Tubes in ready stock: Ø 6–200 mm · tubes to 300 OD. Cut to length or sheet size on request.
Tensile25 MPa
RangeØ 6–200 mm
In stock
I. Sizes & weights
Nominal weights at 2.2 g/cm³ · Ø 6–200 mm · tubes to 300 OD| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 6 | 0.06 | 0.37 | |
| 8 | 0.11 | 0.66 | |
| 10 | 0.17 | 1.04 | |
| 12 | 0.25 | 1.49 | |
| 16 | 0.44 | 2.65 | |
| 20 | 0.69 | 4.15 | |
| 25 | 1.08 | 6.48 | |
| 32 | 1.77 | 10.6 | |
| 40 | 2.76 | 16.6 | |
| 50 | 4.32 | 25.9 | |
| 63 | 6.86 | 41.1 | |
| 80 | 11.1 | 66.4 | |
| 100 | 17.3 | 103.7 | |
| 125 | 27.0 | 162.0 | |
| 160 | 44.2 | 265.4 | |
| 200 | 69.1 | 414.7 |
III. Mechanical properties
- Density
- 2.20 g/cm³
- Tensile
- 25 MPa
- Max service
- 260 °C
- Chemical
- Inert to nearly all
IV. Supply condition
- Condition
- Moulded / skived
- Machinability
- Good
- Forms
- round, tube
- Cutting
- Band saw ±1 mm
- SKU
- SST-EP-06
V. Weigh it, then request it.
Locked to PTFEShape
Material
PTFE · 2.2 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 2.2 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Applications
Seals, valve seats, chemical bushes
Questions
About PTFE
Can you cut PTFE to my sizes?
Yes. PTFE is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with PTFE?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 6–200 mm · tubes to 300 OD. For large tonnage, message us to reserve material.
What are the equivalents of PTFE?
PTFE virgin, Glass / carbon filled on request. Equivalents are close matches; confirm against your drawing's specification.
