SS 304 SS Hexagonal & Angle Bars
AISI 304 / 316 / 202 · DIN 1.4301 / 1.4401 · JIS SUS304 / SUS316
SS Hexagonal & Angle Bars in ready stock at our Madurai godowns, hot rolled, pickled / bright, Hex 6–75 A/F · angles 20×20 to 75×75. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8 g/cm³ · Hex 6–75 A/F · angles 20×20 to 75×75| A/F mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 8 | 0.44 | 2.66 | |
| 10 | 0.69 | 4.16 | |
| 13 | 1.17 | 7.03 | |
| 17 | 2.00 | 12.0 | |
| 19 | 2.50 | 15.0 | |
| 22 | 3.35 | 20.1 | |
| 24 | 3.99 | 23.9 | |
| 27 | 5.05 | 30.3 | |
| 32 | 7.09 | 42.6 | |
| 36 | 8.98 | 53.9 | |
| 41 | 11.6 | 69.9 | |
| 46 | 14.7 | 88.0 | |
| 50 | 17.3 | 103.9 | |
| 55 | 21.0 | 125.7 | |
| 60 | 24.9 | 149.6 | |
| 75 | 39.0 | 233.8 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | Cr | Ni |
|---|---|---|---|---|---|
| Min | – | – | – | 18.0 | 8.0 |
| Max | 0.08 | 2.00 | 0.75 | 20.0 | 10.5 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 515 MPa min
- Yield
- 205 MPa min
- Elongation
- 40% min
- Grades
- 304 / 316 / 202
IV. Supply condition
- Condition
- Hot rolled, pickled / bright
- Machinability
- Fair
- Forms
- hex, angle
- Cutting
- Band saw ±1 mm
- SKU
- SST-SS-14
V. Weigh it, then request it.
Locked to SS 304SS 304 · 8 g/cm³
W = 0.866025 × A/F² × L × ρ ÷ 1,000,000 · ρ = 8 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Fittings, frames, supports
About SS 304
Can you cut SS 304 to my sizes?
Yes. SS 304 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with SS 304?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Hex 6–75 A/F · angles 20×20 to 75×75. For large tonnage, message us to reserve material.
What are the equivalents of SS 304?
AISI 304 / 316 / 202, DIN 1.4301 / 1.4401, JIS SUS304 / SUS316. Equivalents are close matches; confirm against your drawing's specification.
