SS 304 Round Bars
AISI 304 (UNS S30400) · DIN 1.4301 · JIS SUS304 · IS X04Cr19Ni9
SS 304 Round Bars in ready stock at our Madurai godowns, solution annealed, Ø 3–300 mm bright / black. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8 g/cm³ · Ø 3–300 mm bright / black| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 6 | 0.23 | 1.36 | |
| 8 | 0.40 | 2.41 | |
| 10 | 0.63 | 3.77 | |
| 12 | 0.90 | 5.43 | |
| 16 | 1.61 | 9.65 | |
| 20 | 2.51 | 15.1 | |
| 25 | 3.93 | 23.6 | |
| 32 | 6.43 | 38.6 | |
| 40 | 10.1 | 60.3 | |
| 50 | 15.7 | 94.2 | |
| 63 | 24.9 | 149.6 | |
| 80 | 40.2 | 241.3 | |
| 100 | 62.8 | 377.0 | |
| 125 | 98.2 | 589.0 | |
| 160 | 160.8 | 965.1 | |
| 200 | 251.3 | 1,508.0 | |
| 250 | 392.7 | 2,356.2 | |
| 300 | 565.5 | 3,392.9 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | Cr | Ni | S |
|---|---|---|---|---|---|---|
| Min | – | – | – | 18.0 | 8.0 | – |
| Max | 0.08 | 2.00 | 0.75 | 20.0 | 10.5 | 0.030 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 515 MPa min
- Yield
- 205 MPa min
- Hardness
- 201 HB max
- Elongation
- 40% min
IV. Supply condition
- Condition
- Solution annealed
- Machinability
- Fair
- Forms
- round
- Cutting
- Band saw ±1 mm
- SKU
- SST-SS-01
V. Weigh it, then request it.
Locked to SS 304SS 304 · 8 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 8 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Food, pharma and dairy equipment
About SS 304
Can you cut SS 304 to my sizes?
Yes. SS 304 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with SS 304?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 3–300 mm bright / black. For large tonnage, message us to reserve material.
What are the equivalents of SS 304?
AISI 304 (UNS S30400), DIN 1.4301, JIS SUS304, IS X04Cr19Ni9. Equivalents are close matches; confirm against your drawing's specification.
