Cu ETP Copper Busbars & Flat Strip
UNS C11000 (ETP) · EN Cu-ETP (CW004A) · IS 191 ETP · BS C101
Copper Busbars & Flat Strip in ready stock at our Madurai godowns, half hard / hard drawn, 12×3 to 150×12 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8.96 g/cm³ · 12×3 to 150×12 mm| W × T mm | kg / metre | kg / 6 m | |
|---|---|---|---|
| 20 × 3 | 0.54 | 3.23 | |
| 25 × 5 | 1.12 | 6.72 | |
| 32 × 6 | 1.72 | 10.3 | |
| 40 × 6 | 2.15 | 12.9 | |
| 50 × 8 | 3.58 | 21.5 | |
| 65 × 10 | 5.82 | 34.9 | |
| 75 × 12 | 8.06 | 48.4 | |
| 100 × 12 | 10.8 | 64.5 | |
| 125 × 16 | 17.9 | 107.5 | |
| 150 × 20 | 26.9 | 161.3 | |
| 200 × 25 | 44.8 | 268.8 |
II. Chemical composition (% by weight)
| Element | Cu | O | Pb | Fe |
|---|---|---|---|---|
| Min | 99.90 | 0.02 | – | – |
| Max | – | 0.04 | 0.005 | 0.005 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 220–385 MPa (temper)
- Conductivity
- 100% IACS min
- Hardness
- 40–110 HV
- Elongation
- 6–45%
IV. Supply condition
- Condition
- Half hard / hard drawn
- Machinability
- Fair
- Forms
- flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-06
V. Weigh it, then request it.
Locked to Cu ETPCu ETP · 8.96 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 8.96 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Panels, switchgear, transformers
About Cu ETP
Can you cut Cu ETP to my sizes?
Yes. Cu ETP is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with Cu ETP?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
12×3 to 150×12 mm. For large tonnage, message us to reserve material.
What are the equivalents of Cu ETP?
UNS C11000 (ETP), EN Cu-ETP (CW004A), IS 191 ETP, BS C101. Equivalents are close matches; confirm against your drawing's specification.
