IS 2062 Mild Steel Square Bars
IS 2062 E250 · EN S275JR · ASTM A36 · JIS SS400
Mild Steel Square Bars in ready stock at our Madurai godowns, hot rolled, 10–100 mm square. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · 10–100 mm square| Side mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 10 | 0.79 | 4.71 | |
| 12 | 1.13 | 6.78 | |
| 16 | 2.01 | 12.1 | |
| 20 | 3.14 | 18.8 | |
| 25 | 4.91 | 29.4 | |
| 32 | 8.04 | 48.2 | |
| 40 | 12.6 | 75.4 | |
| 50 | 19.6 | 117.8 | |
| 63 | 31.2 | 186.9 | |
| 75 | 44.2 | 264.9 | |
| 100 | 78.5 | 471.0 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | S | P |
|---|---|---|---|---|---|
| Min | – | – | – | – | – |
| Max | 0.23 | 1.50 | 0.40 | 0.045 | 0.045 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 410 MPa min
- Yield
- 250 MPa min
- Elongation
- 23% min
- Bend
- Passes 180°
IV. Supply condition
- Condition
- Hot rolled
- Machinability
- Good
- Forms
- square
- Cutting
- Band saw ±1 mm
- SKU
- SST-MSS-03
V. Weigh it, then request it.
Locked to IS 2062IS 2062 · 7.85 g/cm³
W = S² × L × ρ ÷ 1,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Gates, grills, machine frames, keys
About IS 2062
Can you cut IS 2062 to my sizes?
Yes. IS 2062 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with IS 2062?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
10–100 mm square. For large tonnage, message us to reserve material.
What are the equivalents of IS 2062?
IS 2062 E250, EN S275JR, ASTM A36, JIS SS400. Equivalents are close matches; confirm against your drawing's specification.
