E250 Mild Steel Plates & Sheets
IS 2062 E250 · EN S275JR · ASTM A36 · JIS SS400
Mild Steel Plates & Sheets in ready stock at our Madurai godowns, hot rolled, 0.8–100 mm thick · 1250 / 1500 / 2000 mm wide. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · 0.8–100 mm thick · 1250 / 1500 / 2000 mm wide| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 0.8 | 6.28 | 19.6 | |
| 1 | 7.85 | 24.5 | |
| 1.6 | 12.6 | 39.3 | |
| 2 | 15.7 | 49.1 | |
| 3 | 23.5 | 73.6 | |
| 5 | 39.3 | 122.7 | |
| 6 | 47.1 | 147.2 | |
| 8 | 62.8 | 196.3 | |
| 10 | 78.5 | 245.3 | |
| 12 | 94.2 | 294.4 | |
| 16 | 125.6 | 392.5 | |
| 20 | 157.0 | 490.6 | |
| 25 | 196.3 | 613.3 | |
| 32 | 251.2 | 785.0 | |
| 40 | 314.0 | 981.3 | |
| 50 | 392.5 | 1,226.6 | |
| 63 | 494.5 | 1,545.5 | |
| 80 | 628.0 | 1,962.5 | |
| 100 | 785.0 | 2,453.1 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | S | P |
|---|---|---|---|---|---|
| Min | – | – | – | – | – |
| Max | 0.23 | 1.50 | 0.40 | 0.045 | 0.045 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 410 MPa min
- Yield
- 250 MPa min
- Elongation
- 23% min
- Bend
- Passes 180°
IV. Supply condition
- Condition
- Hot rolled
- Machinability
- Good
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-MSS-06
V. Weigh it, then request it.
Locked to E250E250 · 7.85 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Fabrication, tanks, base plates, gussets
About E250
Can you cut E250 to my sizes?
Yes. E250 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with E250?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
0.8–100 mm thick · 1250 / 1500 / 2000 mm wide. For large tonnage, message us to reserve material.
What are the equivalents of E250?
IS 2062 E250, EN S275JR, ASTM A36, JIS SS400. Equivalents are close matches; confirm against your drawing's specification.
