D3 HCHCR D3 Tool Steel Bars
AISI D3 · DIN 1.2080 (X210Cr12) · JIS SKD1 · BS BD3
HCHCR D3 Tool Steel Bars in ready stock at our Madurai godowns, annealed, Ø 10–250 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · Ø 10–250 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 10 | 0.62 | 3.70 | |
| 12 | 0.89 | 5.33 | |
| 16 | 1.58 | 9.47 | |
| 20 | 2.47 | 14.8 | |
| 25 | 3.85 | 23.1 | |
| 32 | 6.31 | 37.9 | |
| 40 | 9.86 | 59.2 | |
| 50 | 15.4 | 92.5 | |
| 63 | 24.5 | 146.8 | |
| 80 | 39.5 | 236.8 | |
| 100 | 61.7 | 369.9 | |
| 125 | 96.3 | 578.0 | |
| 160 | 157.8 | 947.0 | |
| 200 | 246.6 | 1,479.7 | |
| 250 | 385.3 | 2,312.0 |
II. Chemical composition (% by weight)
| Element | C | Si | Mn | Cr |
|---|---|---|---|---|
| Min | 1.90 | – | – | 11.0 |
| Max | 2.20 | 0.60 | 0.60 | 13.5 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Annealed
- 255 HB max
- Hardened
- 58–64 HRC
- Use
- Drawing and forming dies
- Wear resistance
- Very high
IV. Supply condition
- Condition
- Annealed
- Machinability
- Difficult
- Forms
- round, flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-AES-16
V. Weigh it, then request it.
Locked to D3D3 · 7.85 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Drawing dies, forming tools
About D3
Can you cut D3 to my sizes?
Yes. D3 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with D3?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 10–250 mm. For large tonnage, message us to reserve material.
What are the equivalents of D3?
AISI D3, DIN 1.2080 (X210Cr12), JIS SKD1, BS BD3. Equivalents are close matches; confirm against your drawing's specification.
